HOME    SEARCH    ABOUT US    CONTACT US    HELP   
           
Prev Next

18.8.1301    COMPLIANCE WITH WEIGHING LOCATION SIGNS - JURISDICTIONAL BYPASS RESTRICTIONS

(1) Drivers of vehicles meeting the requirements of 61-10-141(1) and (3), MCA, are required to stop at all weighing locations displaying an open sign.

(2) Drivers operating vehicles for carriers enrolled in electronic weigh station bypass programs may follow in-cab signals at equipped weigh station sites which signals shall indicate whether the vehicle must stop, subject to jurisdictional bypass restrictions.

(3) Jurisdictional bypass restrictions require that regardless of receiving a bypass signal, a driver must enter an open weighing location when any of the following conditions apply:

(a) overweight (including permitted loads);

(b) overwide greater than ten feet (including permitted loads);

(c) overheight greater than 15 feet 6 inches (including permitted loads);

(d) overlength greater than 110 feet (including permitted loads);

(e) oversize in excess of legal dimensions as outlined in 61-10-102, 61-10-103, and 61-10-104, MCA, without a valid permit.

(4) A violation of this rule is punishable as provided by law.

 

History: 61-10-155, MCA; IMP, 61-10-141, MCA; NEW, 2004 MAR p. 2392, Eff. 10/8/04; AMD, 2014 MAR p. 2012, Eff. 9/5/14, AMD, 2019 MAR p. 175, Eff. 2/9/19.

Home  |   Search  |   About Us  |   Contact Us  |   Help  |   Disclaimer  |   Privacy & Security