(1) Referenced standards are available for inspection at the Department of Justice Fire Prevention and Investigation Bureau, Scott Hart Building, the Montana Department of Environmental Quality, Metcalf Building, Helena, Montana, and from the following sources:

(a) American Petroleum Institute (API) , 1220 L Street NW, Washington, DC 20037, (202)682-8372;

(b) National Association of Corrosion Engineers (NACE) , 1440 South Creek Drive, PO Box 218340, Houston, TX 77218, (713)492-0525;

(c) National Fire Protection Association (NFPA) , 1 Batterymarch Park, Quincey, MA 02269, (800)344-3555;

(d) Steel Tank Institute (STI) , 570 Oakwood Road, Lake Zurich, IL 60047, (708)438-8265;

(e) Underwriters Laboratories (UL) , 333 Pfingsten Road, Northbrook, IL 60062, (708)272-8800;

(f) Western Fire Chiefs Association (WFCA) , 5360 South Workman Mill Road, Whittier, CA 90601, (301)699-0124;

(g) petroleum equipment institute (PEI) , PO Box 2380, Tulsa, OK 74101-2380, (918)494-9696; and

(h) International Conference of Building Officials (ICBO) , 5360 South Workman Mill Road, Whittier, CA 90601, (301)699-0541.

(2) For purposes of this chapter, the department hereby adopts and incorporates by reference each of the following:

(a) The following published by the American petroleum institute:

(i) Specification No. 12B, "Specification for Bolted Tanks for Storage of Production Liquids" 1977, 12th edition, as supplemented January, 1982;

(ii) Specification No. 12D, 1982, as supplemented in 1985, "Specification for Field Welded Tanks for Storage of Production Liquids", ninth edition;

(iii) Specification No. 12F, 1982 as supplemented in 1988, "Specification for Shop Welded Tanks for Storage of Production Liquids", tenth edition;

(iv) Specification No. 12P, September 1, 1986, "Specification for Fiberglass Reinforced Plastic Tanks", first edition;

(v) Standard No. 620, 1985, "Recommended Rules for Design and Construction of Large Welded Low-Pressure Storage Tanks", eighth edition;

(vi) Standard No. 650, 1988, "Welded Steel Tanks for Oil Storage", eighth edition;

(vii) RP 651, (Draft-October 1990) , "Cathodic Protection of Aboveground Petroleum Storage Tanks";

(viii) RP 652, (Draft-October 1990) , "Lining of Aboveground Petroleum Storage Tanks";

(ix) Standard No. 653, (Draft-October 1990) , "Tank Inspection, Repair, Alteration and Reconstruction", first edition;

(x) Publication No. 1110, 1981, "Recommended Practice for the Pressure Testing of Liquid Petroleum Pipelines";

(xi) RP 1615, 1987, "Installation of Underground Petroleum Storage Systems";

(xii) RP 1632, 1987, as supplemented in March 6, 1989, "Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems"; and

(xiii) RP 2350, March, 1987, "Overfill Protection for Petroleum Storage Tanks".

(b) The following published by the national association of corrosion engineers:

(i) Standard No. RP-0169-83 "Control of External Corrosion on Underground or Submerged Metallic Piping Systems" (1983) ; and

(ii) Standard No. RP-0285-95 "Control of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid Storage Systems" (1985) .

(c) The national fire protection association's:   Standard No. 31, "Installation of Oil-Burning Equipment", 1987 edition.

(d) The steel tank institute's R892-89, "Recommended Practice for Corrosion Protection of Underground Piping Networks Associated with Liquid Storage and Dispensing Systems".

(e) The following published by underwriters laboratories:

(i) Specification 142 "Steel Aboveground Tanks for Flammable and Combustible Liquids", 7th edition (April 1, 1993) ;

(ii) Standard 567, "Pipe Connectors for Flammable, Combustible and LP Gas";

(iii) UL Subject 971, "UL Listed Non-metal Pipe"; and

(iv) UL 2085, 1994, "Insulated Aboveground Tanks for Flammable and Combustible Liquid".

(f) Uniform Fire Code (UFC) , the most recent edition adopted by the fire prevention and investigation bureau.

(g) The petroleum equipment institute's standard RP200-92, "Recommended Practice for the Installation of Aboveground Storage Systems for Motor Vehicle Fueling".

(h) Uniform Mechanical Code, the most recent edition adopted by the department of commerce, building codes bureau.

(3) The documents incorporated by reference in (2) above may be obtained at the Department of Justice Fire Prevention and Investigation Bureau, Scott Hart Building, and the Montana Department of Environmental Quality, PO Box 200901, Helena, MT 59620-0901.